PU-1H2HBTE
Splitter 1x2 ( 1 HDMI et 2 sorties HDBaseT™ Splitter (100m)
Description
The PU-1H2BTE splitter accepts 1x HDMI input and distributes to 2 HDBaseT™ outputs, plus 1 HDMI bypass output. The HDBaseT™ outputs allow uncompressed HDMI, LAN, PoE, IR, and RS-232 signals to be transmitted over a Single CAT5e/6/7 cable up to 100m. Installers can confidently distribute HDMI signals to 3 displays, and if required, use the HDMI bypass output to cascade the HDMI signal up to 5 times with additional HDBaseT™ splitters.
PU-507RX Receivers are recommended to utilise the full 5-Play™ functionality of the HDBaseT™ outputs of this device.
- Supports all v1.4 HDMI resolutions plus 4K
- HDMI, HDCP, & DVI compliant
- Supports uncompressed video/audio up to 10.2Gbps
- Supports resolutions VGA~WUXGA, 480i~1080p, 4K UHD@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2), 4K UHD@ 60Hz (YUV 4:2:0), 4K/2K@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2) and 4K/2K@ 60Hz (YUV 4:2:0) dependent upon the output display’s EDID settings
- Supports HDCP repeating and CEC functions
- Supports 1080p distances up to 100 meters through CAT5e/6 cables
- Audio support up to 7.1CH & Dolby TrueHD, DTS-HD
- Supports full 5-Play™ Convergence : HDMI / LAN / PoC (Power over Cable) / IR / RS-232
- Supports 3D signals
- Supports 4K/2K & 4K UHD - CAT5e/6 = 70m & CAT6a/7 = 100m
| Inputs | 1x HDMI [1x HDMI Uncompressed AV and Data] 2x 3.5mm Stereo mini-jack [2x RS-232] 2x 3.5mm Stereo mini-jack [2x Infra Red Receiver] |
| Outputs | 1x HDMI [1x HDMI Uncompressed AV and Data] 2x RJ45 [2x HDMI & Propriety Data] 2x 3.5mm Stereo mini-jack [2x Infra Red Emitter] 1x RJ45 [1x Ethernet (I/O) IP] |
| PSU: | 24V/2.7A |
| Dimensions | 145mm [W] x 160mm [D] x 30mm [H] |
| Net Weight | 530g |
| Gross Weight | 700g |