EL-7500V
Sélecteur de présentation HHDMI / VGA - HDBaseT (48V)
Description
The HDBaseT output provides great versatility to extend your audio and video up to 70 metres over a single run of Cat.5e/6/7 cable. The HDBaseT output can provide 48V PoH power to compatible HDBaseT Receivers.
The EL-7500V is an advanced rack-mountable HDMI, VGA, Composite and Component presentation switcher. This device can scale and switch input sources to its HDMI, VGA and HDBaseT™ outputs, with their associated audio signals to the native resolutions supported by the connected display. Control is via the IR remote, RS-232, IP, WebGUI or via manual selection buttons with OSD (On Screen Display). Both digital and analogue stereo audio is supported via a built-in DAC (Digital to Analogue Converter) and ADC (Analogue to Digital Converter).
The HDBaseT output provides great versatility to extend your audio and video up to 70 metres over a single run of Cat.5e/6/7 cable. The HDBaseT output can provide 48V PoH power to compatible HDBaseT Receivers.
The EL-7500V is the perfect solution for any educational or commercial environment requiring integration of multiple sources and signal formats to multiple simultaneous output formats.
- HDMI 1.3 and DVI 1.0 compatible
- HDCP 1.1 compliant
- Multiple video and audio inputs: 3 HDMI, 3 VGA, 1 Component Video, 1 Composite Video, and 8 Stereo audio
- Supports switching and scaling of multiple AV inputs for display over mirrored HDMI, HDBaseT and VGA outputs
- Supports input and output resolutions up to 1080p/WUXGA (RGB)
- Supports pass-through of LPCM 2.0 audio
- Supports 3D de-interlace, noise reduction, and 3D comb filtering for composite video sources
- Frame rate conversion support
- Supports analogue to digital (ADC) and digital to analogue (DAC) audio conversion, Em-Bedding & De-Embedding
- Quick output resolution switching via hot keys
- HDBaseT feature support: HD Video and Audio, Ethernet, 48V PoH, and Control (bidirectional IR/RS-232 pass-through)
- HDBaseT output provides 48V PoH to compatible HDBaseT Receivers
- Supports EDID and HDCP management
- Remote control provides discrete input source selection
| Inputs | 3x HDMI [3x HDMI Uncompressed AV and Data] 3x 15pin Dsub [3x VGA RGBHV] 3x RCA [1x YUV YPbPr Component / YCbCr Component] 1x RCA [1x Composite] 4x RCA [2x Analogue Stereo (L/R)] 6x 3.5mm Stereo mini-jack [6x Analogue Stereo(L/R)] 1x 3.5mm Stereo mini-jack [1x Infra Red Receiver] 1x RJ45 [1x LAN Serving] 1x USB Type A [1x Service Port Propriety Data] 2x 9pin Dsub [2x RS-232 Data] 1x 15pin Dsub [1x VGA RGBHV] |
| Outputs | 1x HDMI [1x HDMI Uncompressed AV and Data] 1x RJ45 [1x HDBaseT HDMI & Propriety Data] 1x 3.5mm Stereo mini-jack [1x Analogue Stereo(L/R)] 1x RCA [1x Coaxial 2 Channel LPCM] 1x 15pin Dsub [1x VGA RGBHV] 1x 3.5mm Stereo mini-jack [1x Infra Red Emitter] |
| PSU: | 24V/6.25A |
| Dimensions | 432mm [W] x 183mm [D] x 44mm [H] |
| Net Weight | 2200g |
| Gross Weight | 3100g |